MAC'S SHOOTIN' IRONS,LLC
OUR TG-1 FINISH WILL NOT FILL IN OR BLUR DETAILED ENGRAVING OR SCROLLING. IN MOST CASES,
IT WILL MAKE IT CLEARER AND SHARPER BECAUSE YEARS OF BUILT UP CRUD IS
REMOVED AS PART OF THE PROCESS.
THIS DESERT EAGLE .44 IS COMPLETED WITH OUR TG-1 FINISH IN DESERT TAN WITH BLACK TRIM
A ROCK ISLAND 1911 COMPLETED IN BLACK AND CHARCOAL TG-1
THIS IS A "BEFORE" PHOTO OF AN ASTRA.
THIS
IS THE SAME PISTOL AFTER WE REFINISHED IT WITH OUR BLACK TG-1 FINISH.
THIS CZ WAS FINISHED WITH OUR SATIN NICKEL PLATE AND BLACK TRIM. (TG-1)
THESES MAKAROV'S WERE FINISHED WITH OUR TG-1 FINISH IN A COMBINATION OF BLACK AND OD GREEN.
THIS FEG HI-POWER CLONE IS FINISHED IN BLACK AND DESERT TAN.
A BERETTA FINISHED WITH OUR TG-1 FINISH IN CHARCOAL WITH BLACK TRIM
THIS SAUER AND SOHN MODEL 1930 HAD BEEN CHROME PLATED SOME TIME AGO. THE CHROME WAS PEELING OFF AND IT LOOKED PRETTY ROUGH.
IT'S NOW COMPLETED IN OUR BLACK AND CHARCOAL TG-1 FINISH AND IS A NICE CONCEALABLE PISTOL.
THIS CUSTOM BUILT AIR RIFLE USES VERY HIGH PRESSURE TO PROPEL A FIFTY CALIBER PROJECTILE. IT SOUNDS LIKE A
TWELVE GUAGE WHEN FIRED! IT'S COMPLETED IN OUR BLACK AND OD GREEN TG-1 FINISH.
THIS DESERT EAGLE .50AE HAD BEEN STORED IN A HUMID ENVIRONMENT AND WAS DEVELOPING SIGNIFICANT SURFACE RUST.
MOST OF THE RUST WAS IN THE CREVICES AND UNDER THE GRIPS.
WE REFINISHED IT WITH OUR SATIN NICKEL PLATE AND TG-1 BLACK.
THIS IS A MASSIVE HANDGUN! HERE'S A COMPARISON PHOTO WITH IT AND A BROWNING HI-POWER
THIS WALTHER PPK WAS FINISHED IN HOT PINK! IT'S A GRADUATION GIFT FOR A YOUNG LADY COMPLETING COLLEGE.
(THAT'S HIS STORY AND I'M STICKING TO IT!)
THIS ROCK ISLAND ARMORY 1911 IS COMPLETED WITH OUR BLACK AND OD GREEN TG-1 FINISH
THIS WINCHESTER MODEL 94 IS COMPLETED IN OUR BLACK AND CHARCOAL TG-1 FINISH. THE WOODEN STOCK SHOWED HEAVY USE
WITH LOTS OF DINGS AND GOUGES. WE FINISHED IT WITH OUR CHARCOAL TUFF-STOCK FINISH.
YES, WE'LL REFINISH A PARTS JOB!
YES, THESE BEFORE AND AFTER PHOTO'S REALLY ARE OF THE SAME SHOTGUN.
FORTUNATELY, THIS CUSTOMER HAD US SAVE IT BEFORE IT WAS DESTROYED BY THE RUST. PLUS, IT WILL NEVER RUST AGAIN WITH OUR TUFF-GUN FINISH ON IT. GARUANTEED!
THIS 1911 IS FINISHED WITH OUR OD GREEN TG-1 ON THE FRAME AND OUR BLACK TG-1
ON THE SLIDE. THE HARDWARE WAS COMPLETED IN OPPOSITES.
THESE ARE BEFORE AND AFTER PHOTO'S OF A COLT 1911.
IT'S COMPLETED WITH OUR CHARCOAL TG-1 FINISH.
AN H & K P-7 FINISHED WITH OUR BLACK TG-1 AND TRIMMED WITH OUR SATIN NICKEL PLATING.
THIS COBRAY MAC-11 WAS WATER DAMAGED AND RUSTED. THESE PHOTO'S
SHOW IT IN IT'S ORIGINAL CONDITION AND THEN AFTER ABRASIVE BLASTING.
THIS PHOTO SHOWS THE SAME FIREARM RE-ASSEMBLED
AFTER OUR BLACK TUFF-GUN 1 FINISH WAS APPLIED.
THIS 1911 WAS COMPLETED WITH OUR SATIN NICKEL PLATE ON THE FRAME AND
SLIDE WITH THE HARDWARE IN OUR BLACK TG-1 FINISH.
THIS CZ WAS LOOKING PRETTY ROUGH.
HERE'S THE SAME PISTOL. THIS IS OUR MIL-PARK GREEN TG-1 FINISH ON THE FRAME AND
OUR BLACK TG-1 FINISH ON THE SLIDE. THE PARTS ARE IN CONTRASTS.
THIS WITNESS IS COMPLETED WITH OUR SATIN NICKEL PLATE AND BLACK TUFF-GUN FINISH.
THESE TWO MAKAROV'S WERE DAMAGED IN THE KATRINA HURRICANE...ALMOST BEYOND SAVING.
THERE WAS SOME SLIGHT PITTING STILL VISIBLE AFTER THE FINISH WORK WAS COMPLETED
BUT THEY ARE ALMOST NOT RECOGNIZABLE AS THE SAME TWO HANDGUNS.
THESE TWO PHOTO'S ARE OF MY WIFES H/D SHOTGUN. IT'S AN OLD SEAR'S MODEL WHICH IS REALLY THE MOSSBERG MODEL 500.
THE LIGHT, LASER AND RED DOT SITE MAKE IT READY FOR ALL LIGHT CONDITIONS.
IF THE ELECTRONICS FAIL, THE IRON SITES ARE STILL VISIBLE AND FUNCTIONAL.
THE LASER IS CONTROLLED BY THE RED "THUMB BUTTON" ON THE GRIP.
THE KNOXX RECOIL REDUCING STOCK MAKES THE 12 GUAGE 00 BUCK SHOT EASY FOR HER TO CONTROL.
I WAS UNABLE TO FIND A FOREARM THAT FIT HER SMALL HANDS
SO I MACHINED THIS ONE OUT OF ALUMINUM.
THE BLACK STRIPS ARE NON-SLIP TAPE.
YES, SHE LIKES IT AND IS PRETTY GOOD WITH IT.
THIS SIG IS COMPLETED IN OUR BLACK AND CHARCOAL TWO TONE FINISH.
(TUFF-GUN 1)
THIS 1911 IS COMPLETED WITH A BLACK TOP OVER A CHARCOAL BOTTOM WITH
POLISHED STAINLESS STEEL TRIM.
THIS UNIQUE LOOKING HAND GUN IS A (VERY!) BIG BORE HIGH PRESSURE AIR PISTOL FINISHED IN
OUR OD GREEN AND BLACK TUFF-GUN 1 FINISH. PLEASE NOTICE THE HIGH PRESSURE AIR FITTING
ON THE FRONT OF THE PRESSURE TANK TUBE.
THIS BOB-CAT WEAPONS SYSTEMS MODEL 89 IS COMPLETED
WITH OUR BLACK TG-1 FINISH.
THIS 1911 IS COMPLETED IN OUR TWO TONE BLACK AND
OD GREEN TUFF-GUN FINISH.
THIS REVOLVER IS COMPLETED IN OUR TWO TONE BLACK AND
CHARCOAL TUFF-GUN FINISH.
THIS RUGER MKII HAS A 10 INCH STAINLESS BULL BARREL. THE FRAME AND A
FEW SMALL PARTS WERE FINISHED WITH OUR TG-1 FINISH. THE INTERNALS WERE SMOOTHED
AND MATCHED. WITH THE SCOPE, THIS PISTOL IS SCARY ACCURATE. THIS IS ONE OF
MY PERSONAL ONES.
THIS DESERT EAGLE IS COMPLETED WITH OUR BLACK AND OD GREEN TG-1 FINISH.
THIS GARAND HAS THE METAL FINISHED WITH OUR BLACK
TUFF-GUN FINISH
BLACK TUFF-GUN FINISH ON THE METAL WITH DESERT TUFF-STOCK
FINISH ON THE FURNITURE
THIS STG-58 IS COMPLETED WITH OUR OD GREEN WITH BLACK TRIM TUFF-GUN 1 FINISH.
THE FURNITURE IS FINISHED WITH OUR BLACK TUFF-STOCK FINISH.
THESE ARE BEFORE AND AFTER PHOTO'S OF FIVE LONG GUNS THAT WERE IN A HOME FIRE. THEY WERE NOT HEAT DAMAGED BUT WERE SMOKE DAMAGED AND VERY QUICKLY FLASH RUSTED BY THE STEAM FROM THE FIRE HOSES. FORTUNATELY, THE OWNER GOT THEM TO US FAST ENOUGH SO THAT WERE ABLE TO RESTORE THEM TO A VERY NICE LOOKING AND FUNCTIONAL CONDITION.
NOTE: SMOKE AND WATER DAMAGED
FIREARMS WILL VERY QUICKLY RUST. SOAKING THEM IN A MEDIUM WEIGHT OIL INSIDE
AND OUT WILL SIGNIFICANTLY SLOW DOWN MOST OF THE CORROSION. YOUR HOME OWNERS
INSURANCE WILL COVER THE REPAIR COSTS. MAC'S SHOOTIN' IRONS DOES
DEAL WITH INSURANCE COMPANIES.
THIS IS A PHOTO OF THE FRONT END OF MY SPAS 12. IT WAS COMPLETED IN BLACK AND OD GREEN WITH OUR TG-1 FINISH. THE BARREL EXTENSION WAS "MANUFACTURED" BY ME BECAUSE THE FACTORY EXTENSIONS ARE EITHER NOT AVAILABLE OR INCREDIBLY EXPENSIVE.
YES, WE CAN ZERO YOUR RIFLE IN FOR YOU.
A MANUFACTURER OF A GUN FINISH THAT IS VERY POPULAR WITH DO-IT-YOUR-SELFER'S CLAIMS THAT: " WITH THEIR PRODUCT, NO SURFACE PREPARATION IS REQUIRED EXCEPT FOR A GOOD CLEANING". UH-HUH! SURE! THE FINAL PRODUCT DEPENDS 90% ON THE SURFACE PREPARATION. THAT MEANS APPEARANCE, DURABILTY AND RESISTANCE TO ADVERSE CONDITIONS.
NEED
TO KNOW IF THE FINISH WILL WITHSTAND THE DE-ICERS IN AVIATION FUEL?
HOW
ABOUT HYDROCHLORIC ACID? OR MAYBE YOU JUST NEED TO KNOW IF
IT
WILL BE OK TO STORE IT ON YOUR BOAT? WE USE ONLY GUNKOTE FOR
THE
FINAL TOP COAT IN OUR TUFF-GUN FINISH. THAT MEANS THAT ALL OF
THESE
QUESTIONS AND MORE CAN BE EASILY ANSWERED. ASK THAT SAME
QUESTION
OF "THEM" AND SEE WHAT KIND OF ANSWER YOU GET!
THIS FRAME AND SLIDE WERE FINISHED WITH "THEIR"
FINISH PER THEIR INSTRUCTIONS.
IS THIS NORMAL WEAR AND TEAR
FOR "THEIR" FINISH?
.
WARNING! WARNING! WARNING!
THE FOLLOWING PHOTO'S ARE ABSOLUTELY DISGUSTING AND WILL CAUSE YOU TO LOOSE SLEEP.
DO NOT CONTINUE PAST THIS POINT IF YOU HAVE A WEAK STOMACH!
YOU HAVE BEEN WARNED!
THIS SIG WAS REFINISHED BY A CERTIFIED GUNSMITH! AT LEAST, IT SAYS HE'S A CERTIFIED GUNSMITH ON HIS BUSINESS CARD. HE USED "THEIR" FINISH PER THEIR INSTRUCTIONS. AT LEAST, HE CLAIMS HE FOLLOWED THEIR INSTRUCTIONS. NOW, I DON'T LIKE "THEIR" FINISH AND WON'T USE IT BUT THIS IS WAY PAST THEIR NORMAL "I LOOKED TO CLOSELY AT IT AND THEIR FINISH FELL OFF". HE ATTEMPED TO DO A TWO TONE WITH TAN AND BLACK. LOOK CLOSELY AT THE PHOTO'S AND SEE IF YOU NOTICE ANYTHING ODD. REMEMBER, HE CLAIMS TO BE A CERTIFIED GUNSMITH. (HINT. LOOK FOR THE PATTERN!!)
HE APPLIED A TWO TONE PATTERN BY MASKING OFF CERTAIN PARTS..WHILE THE PISTOL WAS STILL ASSEMBLED..AND THEN SPRAYED
BLACK OVER THE TAN. YOU CAN SEE THIS REALLY WELL ON THE TRIGGER AND HAMMER. THE GOOPY LOOKING STUFF ON THE TRIGGER AND
HAMMER IS THE FINISH.
HE SPRAYED IT WITH IT STILL ASSEMBLED!
NOTICE THE PATTERN ON THE END OF THE PIN?
SEE THE PATTERN ON THE EXTERNAL SURFACE OF
THE HAMMER RETURN BLOCK? THE BARE SPOTS ON THE BARREL WERE PEELED OFF BY
FINGERNAIL.
THE ARROW IS POINTING TOWARDS THE SEAR.
THE FINISH GLUED IT IN PLACE!!! NOTICE THE BUILT UP CRUD AROUND THE SEAR.
THIS
SO-CALLED GUNSMITH USED RUBBING ALCOHOL
AS THE CLEANING SOLVENT PRIOR TO REFINISHING IT. ALTHOUGH RUBBING ALCOHOL
MAY BE A GOOD SURFACE CLEANER, IT'S NO
GOOD AS A GENERAL CLEANING SOLVENT!
THIS PHOTO OF THE FRAME SHOWS HOW IT WAS
RECEIVED IN OUR SHOP.
YES, HE EVEN SPRAYED UP INSIDE THE BARREL!!!
NOW, LIKE I'VE SAID IT BEFORE: I DON'T LIKE
"THEIR" FINISH AND REFUSE TO USE IT! HOWEVER, IN ALL FAIRNESS,
THIS AWFUL LOOKING JOB IS THE RESULT OF A HACK PRETENDING TO BE A CERTIFIED
GUNSMITH. PER THE CUSTOMER: THE SO-CALLED GUNSMITH TOLD HIM THAT HE DID
IT THAT WAY BECAUSE HE DIDN'T KNOW HOW TO TAKE A SIG APART!
THE SINGLE BIGGEST
PROBLEM WITH ALL SPRAY ON TYPE FIREARM FINISHES IS THAT IT SEEMS SO EASY.
A TOASTER OVEN, SOME BRAKE CLEANER AND A EIGHT DOLLAR AIRBRUSH IS ALL YOU
NEED, RIGHT? PER "THEIR" FINISH INSTRUCTIONS, YOU DON'T EVEN NEED THE TOASTER
OVEN AND DON'T WORRY ABOUT EXPERIENCE: jUST FOLLOW THEIR INSTRUCTIONS!
THE ABOVE PHOTO'S SHOW THE RESULT OF THAT.
YES, IT DOES ALL MAKE A DIFFERENCE!
MAC'S
FINISHES ARE TUFF!
TUFF-GUN! THE NAME SAYS IT ALL
PLEASE CLICK A LINK FOR MORE INFO