MAC'S SHOOTIN' IRONS,LLC
FINISH OPTIONS
TUFF-GUN I
(TG-1)
THIS IS OUR WELL KNOWN MOLLY RESIN COAT FINISH APPLIED OVER OUR RICH AND DEEP ZINC PARKERIZING. BOTH OF THESE FINISHES HAVE AN EXCELLENT REPUTATION FOR THEIR DURABILITY AND WEAR CHARACTERISTICS.
TOGETHER, THEY ARE EXTREMELY RESISTANT TO ADVERSE
WEATHER CONDITIONS,WEAR, AND CORROSION.
THIS FINISH IS PERFECT
FOR CONCEALED CARRY HANDGUNS SINCE IT IS 100 % NON-REACTIVE TO BODY OILS
AND SWEAT. IT'S BUILT
IN LUBRICATION CHARACTERISTICS
ALLOWS YOU TO USE
LESS OIL WHICH MEANS
YOUR CLOTHES WILL NOT
GET OIL STAINED.
THIS FINISH IS AVAILABLE IN BLACK, GRAY, AND OD GREEN. ALL OF THESE COLORS ARE A SATIN TEXTURE WITH NO GLOSS OR SHINE.
OUR
NEW MIL-PARK GREEN IS NOW AVAILABLE IN OUR TUFF-GUN 1 FINISH.
THIS
IS THE PERFECT COLOR TO RESTORE FIREARMS TO THAT DARK GREEN SHADE THAT
WAS COMMON FOR MANY "OLD" MILITARY FIRARMS. IT ALSO LOOKS GREAT ON ANY
OTHER FIREARM. OUR MIL-PARK GREEN IS DARKER THAN OUR STANDARD OD
GREEN. THIS FINISH IS MADE WITH GUNKOTE
AND MEETS OUR QUALITY STANDARDS.
TUFF-GUN II
(TG-2)
THIS IS THE ULTIMATE
FOR A "WORKING" LONG GUN. THE IDEA OF ELECTROSTATICALLY APPLYING
A COATING TO FIREARMS IS
NOTHING NEW BUT WE HAVE
PERFECTED THE PROCESS.
THIS FINISH GIVES YOU
ALL OF THE BENEFITS OF OUR
TUFF-GUN I FINISH WITH
THE ADDED IMPACT AND
ABRASION RESISTANCE
OF AN ELECTROSTATIC
COATING. THIS FINISH
IS CURRENTLY
AVAILABLE IN A SATIN
OR SEMI
GLOSS BLACK. MANY OTHER
COLORS ARE AVAILABLE
BY SPECIAL ORDER.
TUFF-STOCK
(T-S)
TUFF-STOCK IS A PROTECTIVE COATING THAT HAS A VERY FINE PEBBLE TYPE TEXTURE. IT IS NOT ROUGH ON THE HANDS
BUT DOES ADD ANTI SLIP PROPERTIES. OUR TUFF-STOCK FINISHES HAVE TINY SPECKLES THAT ARE SLIGHTLY LIGHTER
ANDDARKER THAN THE BASE COLOR.
WE CAN APPLY OUR TUFF-STOCK
FINISH TO ANY WOOD, SYNTHETIC OR METAL SURFACE. OUR TUFF-STOCK FINISH
IS NOT A SPRAY PAINT OR PICK UP
TRUCK BED LINER! IT
IS AN INDUSTRIAL MARINE GRADE COATING DESIGNED FOR HIGH WEAR AREAS AND
REQUIRES SPECIAL HIGH PRESSURE
EQUIPMENT! ALTHOUGH
NOT QUITE AS CHEMICALLY RESISTANT AS OUR TUFF-GUN FINISHES, IT IS
VERY DURABLE,
ABRASION RESISTANT AND
100% WEATHER PROOF.
THIS FINISH IS AVAILABLE
IN BLACK, DARK GRAY, MEDIUM GRAY, WOODLAND GREEN AND DESERT TAN.
OTHER COLORS ARE
AVAILABALE BY SPECIAL
ORDER.
(NOTE: THE BLACK
HAS NO SPECKLES)
MAC'S SATIN NICKEL PLATING
S-N
THIS IS OUR NEWEST
FINISH. OUR SATIN NICKEL IS APPLIED ELECTROLESS AND IS VERY UNIFORM IN
THICKNESS AND APPEARANCE. IT IS NOT GLOSSY SMOOTH AND LOOKS SIMILAR TO
NEW STAINLESS STEEL. IT IS VERY DURABLE AND LOOKS CLASSY IN COMBINATION
WITH ONE OF OUR BLACK FINISHES IN A TWO TONE PATTERN.
SOME INFORMATION ABOUT OUR TUFF-FINISH PROCESS
OUR PROCESS HAS
BEEN DEVELOPED BY MAC WHO HAS OVER THREE DECADES OF EXPERIENCE APPLYING
THE GUNKOTE MOLLY RESIN FINISH.
HE HAS USED THE
GUNKOTE MOLLY RESIN EXCLUSIVELY FOR THAT ENTIRE TIME AND HAS DEVELOPED
SPECIAL TECHNIQUES USING CUSTOM DESIGNED
EQUIPMENT THAT
IS SPECIFIC TO THE APPLICATION OF OUR TUFF FINISHES.
ANY KID CAN HEAT YOUR
RIFLE BARREL WITH A PROPANE TORCH,
SQUIRT ON A COAT
OF RESIN WITH A TEN DOLLAR AIR
BRUSH AND CURE IT
THE KITCHEN OVEN.
DON'T
YOUR FIREARMS DESERVE BETTER THAN THAT?
OUR PROCESS STARTS
WITH THE COMPLETE DISASSEMBLY OF YOUR FIREARM, DEGREASING IN BOILING
SOLVENT AND ABRASIVE BLASTING TO REMOVE THE OLD FINISH. AFTER PARKERIZING
(OR CHEMICAL PRETREATMENT FOR ALUMINUM OR STAINLESS STEELS) THE PARTS ARE
PLACED IN OUR CUSTOM BUILT PREHEATER. THIS SYSTEM INSURES THAT THE
PARTS ARE ALL AT THE SAME TEMPERATURE ALL OVER. ONCE THE REQUIRED NUMBER
OF COATS OF THE RESIN ARE APPLIED, THE PARTS ARE SUBJECTED TO THE FIRST
STAGE OF THE CURING PROCESS. THE SECOND, THIRD AND FOURTH STAGES OF THE
CURING PROCESS ARE COMPLETED IN A SPECIAL RECIRCULATING OVEN. EVEN THE
SPRAYER USED FOR THE APPLICATION OF THE MOLLY RESIN IS A SPECIAL UNIT WITH
A BUILT IN PRE-HEATER TO INSURE THAT THE RESIN IS AT THE PROPER TEMPERATURE.
YES, IT DOES ALL MAKE A DIFFERENCE!
MAC'S
FINISHES ARE TUFF!
TUFF-GUN!
THE NAME SAYS IT ALL